How to Apply Gold Leaf

by | Jun 22, 2017 | Blog | 150 comments

Landscape & Galactic Dust, 48″ x 60″, acrylic & gold leaf on panel

 

How to Apply Gold Leaf – especially for acrylic & oil painters

If you’ve seen my website and other blog articles, you probably figured out that I really really like gold leaf! I guess I just like shiny stuff! I like the challenge of combining leaf with paint. Anyone game to try? If so, this blog article provides all the details you need to dive right in.

First, I suggest watching the free video I made directly below, where I demonstrate the entire leafing process. After watching that, please return to this article for updated information. I am unable to update videos on Youtube, so here is where I add new information. The sealing steps are especially tricky. As you can see from the comments, all types of issues occur at this step. If you (1) READ this article, and (2) Experiment on a surface you don’t care about BEFORE working on your actual piece, you will get best results.  And please scroll down for supply lists and resources.

 

Important tips

Please note that these instructions are for FINE ART PAINTINGS. If you want to apply leaf on a functional object that will get physical use, like furniture, then use a commercial sealer like polyurethane – NOT a fine art sealer as I recommend below.

If you plan on overpainting leaf with ACRYLIC PAINT, it’s important to know that water-based acrylic can tarnish imitation gold leaf, (only while the acrylic is still wet), if applied over unsealed leaf. Once sealed properly, and fully dry, then the leaf will not tarnish regardless of what you apply over it. This area of sealing is the most misunderstood, so I have included below more details on sealing.

If you are painting with oil paint, there are some differences in the preparation process between acrylic and oil. So first watch the video for general application methods even though in the demonstrations I use acrylic. Then scroll down further for more helpful tips to overpaint with oil.

Nancy Reyner applying gold leaf

If you’ve seen my website and other blog articles, you probably figured out that I really really like gold leaf! I guess I just like shiny stuff! I like the challenge of combining leaf with paint. Anyone game to try? If so, this blog article provides all the details you need to dive right in.

First, I suggest watching the free video I made directly below, where I demonstrate the entire leafing process. After watching that, then return to the article for a summary of steps along with any new information. I will continually update information on leafing here, but may not be able to update in the video. And please scroll down for supply lists and resources. 

If you plan on overpainting leaf with acrylic paint, it’s important to know that water-based acrylic can tarnish imitation leaf, (only while the acrylic is still wet), if applied over unsealed leaf. Once sealed and dry, then the leaf will not tarnish regardless of what you apply over it. This area of sealing is the most misunderstood, so I have included below more details on sealing.

If you are painting with oil paint, there are some differences in the preparation process between acrylic and oil. So first watch the video for general application methods even though in the demonstrations I use acrylic. Then scroll down further for more helpful tips to overpaint with oil.

 

Leaf Application

There are TWO WAYS to apply leaf, regardless of whether you are using real gold leaf or imitation gold leaf. One application method uses leaf adhesive (also called gilding size or leafing size) while the other method is called water gilding, and is more complicated to do.

In my video I demonstrate using the first option I listed – leaf adhesive. Water gilding is time consuming and difficult, but results in perfectly smooth glowing gold. This is great when used on a picture frame, for example. The reason I do not use water gilding (as well as real gold leaf) for a painting surface that will be overpainted, is because in my opinion, a sleek smooth leaf surface does not easily integrate visually with the way I paint, especially when used as a painting background.

 

Real Gold Leaf vs Imitation Gold Leaf

There are two different types of gold leaf you can purchase – real gold leaf and imitation gold leaf. Real gold leaf is made of mostly pure gold and comes in different karats. Imitation (or composite) gold leaf is made of copper and zinc, and comes in a few variations of gold colors.

In my opinion it IS worth the expense to use real gold, as long as you also use the water gilding application, when the gold is mostly uncovered and unpainted, like applying it to a picture frame.

The benefit of using the adhesive method is that it will show some brush strokes, and therefore integrates better when used in a painting. Everyone has a different idea in mind when using gold leaf so you need to decide which works best for you.

For my paintings, I overpaint a good portion of the leaf, so it doesn’t make sense for me to use water gilding along with real gold leaf. I know there are some good reasons some of you may have for using real gold, and that’s fine. I just wanted to share my opinion.

In summary, you can use either application method – water gilding or adhesive – with either type of leaf – real gold or imitation gold. My video demonstrates the adhesive method with imitation leaf. You can use this same method with real gold. With the adhesive method, the two types of leaf will look very similar after application, because of the type of application method. In other words, when using the water gilding method, it makes sense to use real gold leaf instead of imitation gold leaf. When using the glue or size adhesive, then it makes sense to use the imitation leaf and not the real gold.

gold leaf compared to imitation gold leaf
Left: real gold leaf; Right: imitation gold leaf

 

Special Note About Sealing Gold Leaf

There are two different sealing processes you need to consider, for most projects involving leafing along with paint. Let’s call these two sealing processes Pre-Paint Sealing and Post-Paint Sealing.

Pre-Paint Sealing seals over the leaf prior to painting. This is important for both oil and acrylic painters. When you apply paint over the unsealed leaf, which is very delicate, it may get scratched, marred or removed accidentally. Sealing the leaf allows for over-painting with oil or acrylic without negatively affecting the leaf. This sealing process is VERY tricky when sealing imitation gold leaf. That is because this is where you can accidentally tarnish the leaf using the wrong sealer and the wrong sealing application process. See details and tips for avoiding tarnishing below in step 6.

Post-Paint Sealing is a good idea because it provides a protective coat to seal over your finished painting. This usually involves sealing over both leaf and paint, and adds an archival finishing coat when you use an archival varnish. Archival varnishes usually have UV protection and will keep your paintings from fading. They are also removable, which means the layer can be removed for cleaning purposes in the future if needed. This is described further in Step 8.

These two sealing steps have different purposes from each other, and therefore require different products and processes. They also differ depending on whether you are using acrylic or oil under or over the leaf. I have listed the more detailed information below in Step 6 and Step 8 for each of these two sealing steps.

 

Gold Leafing Steps

Watch video above for details & demonstrations, then read the following UPDATED INFORMATION.

1. Prepare Surface
Paint the surface a color. You can use oil or acrylic paint for this underpainting. If you use acrylic paint you can use the water-based adhesive over it to apply the leaf. If you use oil paint you MUST use the solvent-based or oil-based adhesive to apply the leaf. This color will only show minimally under the leaf if you will be covering your surface all the way with leaf. For a classic look use Red Oxide paint color. Optional – add texture using a mixture of Molding Paste with acrylic paint color.

2. Apply adhesive
Choose water-based or solvent-based leaf adhesive (also called gilding or leaf sizing). I use water-based because it is non-toxic and I apply it over acrylic.

The best way to tell if the size is solvent-based or water-based is to read product label instructions. When it directs you to clean brushes with solvents, it is solvent-based (also sometimes called oil-based), while the water based size will instruct you to clean brushes with water. Use either type if it will be applied over a primed or acrylic painted surface. If applying OVER oil paint you must use the solvent-based adhesive and make sure the oil paint is fully dry. Drying times for oil paint depend on how thick the paint is applied, which paint colors are used, and your climate conditions. Apply thinly. Let dry at least 20 minutes before leafing.

3. Apply Leaf
Place wax paper over leaf, rub gently to create static, lift and position to place. Once placed rub lightly, then lift wax paper and repeat to leaf other areas. Allow excess overlap of leaves.

4. Burnish
Place sheet of wax paper over leaf, then rub with moderate pressure using soft cloth. After burnishing let dry for at least 3 days (I prefer at least one week) so the adhesive is fully cured. Do not burnish without the wax paper in between your cloth and leaf or you will remove the leaf.

5. Clean Excess
Using a stiff small brush gently remove excess leaf on the sides of the panel or canvas, and wherever leaves overlap each other.

6. Pre-Paint Sealing: Seal Leaf Before Overpainting
There are two methods to seal leaf prior to painting with acrylic or oil. One involves a solvent-based varnish which is toxic and requires ventilation and proper protection. This gives a stronger coating with no risk of tarnishing the imitation leaf. Let me repeat that in a stronger way. This is the BETTER way to seal over the leaf before applying paint. It has better protection and less room for error in the application.

The other method uses a water-based acrylic medium which is non-toxic, but will require more coats as it offers a thinner coating then the toxic product. Even with multiple coats this will not provide as good a seal as the method above, when you are using aggressive painting techniques such as sanding, pouring acrylic layers, or using thick applications of acrylic paints or acrylic products. This water-based version also has some risks involved with its application. If applied using bad application habits, it can still cause tarnishing. This method requires some understanding about its application for good results. Tips for good application are described in the next paragraph. Unlike imitation gold leaf, real gold leaf will not tarnish, but sealing is still recommended so it won’t get harmed while painting. If using real gold leaf you do not have to worry about any of the cautions I am mentioning here, about tarnishing.

Very important!!! Do not use Golden’s water-based acrylic varnish called Polymer Varnish for the Pre-Paint Seal. If used directly on unsealed leaf it will tarnish the leaf. You can use it for a final Post-Paint Seal as a final coat. See Step 8.

Method 1: Water-based Sealers 

Before I discuss this method using water-based or acrylic sealers, I’d like to make a big point about this NOT being the best method for sealing over imitation gold leaf. The best method is Method 2 – using solvent-based sealers, and is described in the next section below. It is easier, with less risk of error, and provides the best protection for gold leaf – real or imitation. Some people cannot use solvent-based products because they are toxic and so I am providing an alternative here.

To apply a non-toxic sealer, make a mixture combining two water-based mediums from Golden, GAC200 with GAC500, in an approximate 1:1 ratio. You can also use the GAC200 by itself. If you do then apply it in a room with temperature at 70 degrees F or above. This warmer temperature will allow the GAC200 to cure extra hard – best for sealing. By combining it with GAC500 you do not need to apply it as warm, and also this mixture allows for an easier and possibly smoother application. Brush apply one coat of the medium or medium mixture over the leaf using a smooth flat soft brush. Please note – this method will NOT work if you are substituting the GAC200 and GAC500 with any other acrylic mediums. Here’s why these two mediums together will work as a sealer over leaf, but other water-based acrylic mediums will not.

Almost all acrylic products contain ammonia while wet. Ammonia will tarnish copper, the predominant metal in imitation gold leaf. Since the ammonia dissipates by the time the acrylic has dried we can use acrylic as a sealer if it dries fast enough to keep the ammonia from affecting the leaf. GAC200 and GAC500 are extra hard acrylic and very fast drying. Other gloss mediums will not dry as quickly as these GAC mediums and risk tarnishing. Other GAC mediums will not work for this purpose (sealing over imitation gold leaf) either, as they are formulated for different purposes.

This mixture of the two GAC mediums is a bit tricky to apply as you can see from the above information. If it dries too slowly, it won’t work. It you apply it too thickly it will dry slowly. If you add water to the mediums it will dry slowly. Therefore, eliminate any water on the brush and do not add any water into the medium. Smooth it out to a thin film so it dries fast. Do not use a stiff bristle brush, or overbrush by brushing it once it starts to dry and gets tacky (which happens within seconds) so you need to apply the mixture in very very small areas, smoothing it thinly before adding more medium. If you overbrush, you will create a cloudy film that is permanent and ruins your leaf surface.

Wow! Using water-based acrylic mediums as a sealer over imitation gold leaf is quite tricky, right? Please remember I do not recommend this unless you absolutely cannot use the solvent-based varnishes I recommend below and which I also use for my own work.

How many coats of the GAC200 or mixture of GAC200 with GAC500 should you apply? If you plan on overpainting the sealed leaf with heavy applications of acrylic, or other aggressive techniques that require extra protection for the leaf, apply four coats, letting each dry to the touch prior to applying the next. One to three coats will suffice when you plan to overpaint using thin layers of acrylic paint or if overpainting with oil. Once your last coat is applied and dry to the touch you do not need to wait for a longer period and can go ahead and overpaint with acrylic or oil paint.

Method 2: Solvent-based Sealer

Please read helpful safety tips for using toxic solvents, at the end of this article.

PERMANENT SEALERS
Any permanent clear gloss spray sealer or permanent solvent-based varnish will seal the leaf. First check the label to see if it is permanent. The way to tell is from the instruction label on the product container. Removable vanishes will instruct how to remove the dried layer, while permanent ones will not. If it is removable see special instructions in the next paragraph. With permanent sealers, two coats are recommended. Once dry you can apply oil paint over it. To apply acrylic over it, lightly sand, then apply the water-based sealer over it as described above in Method 1 for best adhesion between the acrylic paint and sealer.

REMOVABLE SEALERS
I often recommend using Golden’s MSA Varnish Gloss, or Golden’s Archival Varnish Gloss spray for use over leaf when planning on eventually overpainting with acrylic paint. These two varnishes by Golden are what I use along with the application method described here. These are good fine-art products and seal leaf well even though they are both removable. Since they are removable, wait two weeks after application for the coating to fully dry, then apply a permanent seal coat over it using the water-based sealer I mentioned above in Method 1. You will need to do this whether you are overpainting with oil OR acrylic. You MUST apply something permanent over these removable sealers before applying paint. Once you apply the water-based medium in Method 1 over the removable sealer, you can then overpaint with acrylic once the GAC coating is dry to the touch. If overpainting with oil paint wait a week or more once the GAC coating has dried.

Important: DO NOT overpaint Golden’s MSA Varnish or their Archival Varnish with oil paint UNLESS you seal over the varnish with the mixture of GAC200 and GAC500 as instructed above. These varnishes have UV protection in them, and one of the essential resins used in the varnishes can interfere with the drying process of any oil paint applied over it.

7. Paint
Apply paint opaquely and/or transparently over the sealed leaf to get a variety of effects. For maximum variation and interest, allow some leaf to remain unpainted, some leaf areas to be fully covered, as well as some leaf showing through transparent paint. If you end up with too much paint coverage some of the paint can be sanded off. Here is where it helps to have substantial coats of Pre-Paint Sealing.

8. Post-Paint Sealing- final painting topcoat
It’s a good idea to varnish paintings at the very end, even if you already sealed the leaf prior to painting. Sealing with an archival varnish over leaf and paint is recommended. It enables the painting to be cleaned, and adds UV protection.

For oil painting over leaf, wait about a month for the oil painting to dry before this final varnish coat. Wait longer if oil paint is applied thickly. This final varnish is applied over the whole surface, including leaf and oil paint. Use Goldens Archival Varnish Gloss spray, Golden’s MSA Varnish, Gamvar by Gamblin or any other archival removable solvent-based varnish meant for oil paint.

For acrylic painting over leaf, I like to use Golden’s Polymer Varnish Gloss, which is non-toxic. Do not use this water-based varnish product over oil paint. However it is a good final varnish product to use over acrylic paint and the sealed leaf. And also very important!!! Do not use this product for the Pre-Paint Seal. If used directly on unsealed imitation gold leaf it will tarnish the leaf. If you did not apply enough sealer over the leaf in the Pre-Paint Seal, this varnish may still reach the leaf layer and tarnish it.

For non-fine-art projects like furniture, that will get physically used, apply a commercial sealer like solvent-based polyurethane instead of the fine art varnishes I recommend here.

gold leaf painting by Nancy Reyner
Stargate, 48″ x 36″, acrylic & gold leaf on panel

 

More Resources & Info on Gold Leaf

 
Acrylic Painting Techniques on Gold Leaf Video for purchase
 
View paintings on gold leaf
 
Acrylic Illuminations step-by-step instruction book and ideas on leafing for painters
 
Video – How to Apply Gold Leaf
 
Article on gold leaf by GOLDEN.
 
Please note! While I highly value the tech team at GOLDEN and their expert advice, I do not agree with everything listed in their linked article above. Everything I have written here has been verified by GOLDEN’s top tech advisor. If there are any discrepancies between my article and theirs, know that I have fully tested and verified everything I wrote here. GOLDEN has expertise in acrylic, yet I have more expertise and experience with gold leaf, as it pertains to acrylic and using their products. Therefore, you may find some contradictions between my article and theirs. YES you can use GAC 200 over imitation leaf in the way I describe. YES you can use the removable varnish in between layers as I also describe. The important thing to note is that Golden is correct, that normally their products are not meant for application in the way I am using it. As long as you follow my special application instructions their products will work well for the purposes I am using them here.

 

Supply List & Links

 

SURFACES
Any painting surface such as canvas, fabric, canvas panels or wood panels, objects and walls.

Links for wood painting panels
https://ampersandart.com/art-panels.php
https://www.artisansantafe.com/custom-cradled-wood-panels/

METAL LEAF
Links for metal leaf
https://www.handover.co.uk/
https://www.speedballart.com
https://www.goldenleafproducts.com

LEAF ADHESIVE (also known as gilding or leafing size)
Remember there are two choices: water-based (which is non-toxic and can only be used over acrylic) and solvent-based (which can be used over acrylic or oil).

Links for leaf adhesive:
https://www.gildedplanet.com/oilsize.html
http://www.gildedplanet.com/watersize.html

SEALERS
Remember there are 2 different sealing steps and these require different products. Review this article to make sure you get the right product.

Links for sealers:
https://www.dickblick.com/products/golden-archival-spray-varnish/
https://www.dickblick.com/products/golden-msa-acrylic-varnish/
https://bit.ly/32CZspu
https://amzn.to/2MaO8Lx
https://www.dickblick.com/products/golden-acrylic-polymer-varnishes/

WAX PAPER
Link for wax paper:
https://amzn.to/2GYbO34

Featured course

complete guide to acrylic painting

Bring your visions to life on canvas! From your first brushstroke to your ultimate masterpiece – this course has it all.

Featured Course

Complete Guide to Acrylic Painting


Bring your visions to life on canvas! From your first brushstroke to your ultimate masterpiece – this course has it all.

– END –

 
 

150 Comments

  1. Carl Gutierrez

    this is very nice blog! gained more knowledge about paints

    Reply
  2. Sandi Parker

    Forgive me if this is a duplicate comment; I wasn’t sure if the first one was submitted properly by me and if so, not sure I provided all the info. I’m an abstract painter, who paints in acrylic on canvas. I am adding leaf to FINISHED acrylic paintings – meaning no paint will be applied over the leaf. I am confused about what kind of varnish to use, and whether I can use it over the entire painting. On one painting, I used the Golden Archival Varnish (NOT water based) on the leafed portion only, then waited a week and brushed the GAC 200 over that (again, leafed portion only) – which I realize was probably not correct – I think if I now understand correctly, I do not need the GAC 200 if I’m not painting over the leaf? Finally, on this painting, I brushed on the Liquitex varnish on the acrylic painted portion – this is what I use on all my acrylic abstracts. Can you tell me what methods and varnishes I should use on both the leafed and painted portions of these acrylic paintings?

    Reply
    • Nancy Reyner

      Dear Sandi,
      If the leaf is your final step, and you just want to seal the painting, you can very easily apply any solvent based varnish (like the Archival Gloss Varnish from Golden that you used) over the entire painting – leaf and acrylic paint – and let that be your final coating. You do not need to apply anything else, like the GAC200 over the varnish. I am not familiar with the Liquitex varnish you mentioned. However, if the can says that you clean your brushes with water, then it is water soluble, and the ammonia in that product will tarnish the unsealed leaf. The best varnish to seal leaf is solvent based, which means the can will tell you to clean brushes with solvents, and it will be quite odorous. Hope this helps!
      Nancy

  3. Manjushree Roy

    Thanks Nancy for your detailed video. There aren’t too many videos about this process, so really appreciate your knowledge on this. I am new to using (imitation) gold leaf in my oil paintings and have few questions:
    1. I was going through one of the comments and there you mentioned that a varnish like Gamvar can be applied to the entire painting and that would seal and prevent tarnishing of imitation gold leaf? Is that correct?

    2. I am using un stretched canvas (taped to a board). So it seems I can’t use GAC 200 which is not recommended for flexible surface. Do I have any other alternative? (Of course if Gamvar can seal the entire painting then using GAC 200 becomes redundant. )

    Thanks

    Reply
    • Nancy Reyner

      Hi Manjushree,
      I’m glad you found the video helpful for your work! Here are my answers to your two questions.
      (1) Yes you can apply any varnish that is suitable for oil paint, and apply it over the gold leaf (imitation or real) as well, and at the same time. Exposure to air will tarnish the imitation leaf, but it takes at least a few months. So as long as you apply your varnish in a few months you should not have the leaf tarnish.
      (2) I agree and would not use GAC200 over your canvas, or over the leaf. To seal the leaf prior to applying oil paint, you can use ANY solvent based sealer. I suggest a clear spray you can get inexpensively at home improvement stores. Any clear product in a spraycan is usually solvent based. If you do not want to spray or use solvent-based sealers, then you can use the GAC500 instead of the GAC200. These are similar products, but the GAC500 has more flexibility. These are very tricky to use over imitation leaf. They do have ammonia in them while wet, and will cause immediate tarnishing if not applied correctly. Tips: do not apply thickly, do not let them dry slowly by adding water to the medium or having it on your brush, do not overbrush (if you brush over it while it is tacky it can form a white foam). Hopefully these tips will help, or may encourage you to use the better sealers – solvent based sprays. One important point – do NOT use any removable varnishes. Most fine art varnishes that you apply over oil paint are removable for cleaning purposes. If they are removable you will see the instructions to remove the dry layer of varnish on the product label. If you use removable varnishes over the leaf, and then use oil paint, the solvents in the oil paint mediums will remove the sealer. Hope this helps answer your questions.
      Nancy

  4. Jane

    Hi, your post was so helpful, however, I made the mistake of reading this after finishing multiple oil paintings. Can I save the gold leafing I did underneath this oil painting? It is starting to oxidize and I don’t know what to do. The paint is fortunately dry to the touch, I’m sure it’s still not fully cured. I figured I could apply another layer of gold leaf and spray a varnish over it. Please help me!! Thank you.

    Reply
    • Nancy Reyner

      Hi Jane,

      You can definitely “save” the leaf you did that is under your oil paintings. If it is starting to oxidize, that means it has been exposed to air for awhile, and is not sealed. If you seal it then it will stop oxidizing (or tarnishing). There are two choices I can recommend. First, if the leaf is still OK even with a small amount of tarnishing, then all you need to do is apply a sealer over the entire painting. Use any varnish that works fine with oil paint. Your varnish choices will all be solvent-based to be compatible with your oil paint, but then will also be fine to apply over the leaf as well. Apply at least two spray coats, or one brush application depending on the varnish you use. Make sure you follow instructions for varnish application on the product’s container label. The second option is that if your leaf has tarnished more than you like, you can definitely reapply new leaf right over the old. Clean the old leafed surface with a clean rag. Apply leaf adhesive (you can use either water-based or oil-based as long as you are only going over the leaf and not your oil paint). Apply the leaf and continue with burnishing, cleaning off the excess carefully, and letting it dry at least 3 days. After three days you can apply an oil paint varnish over the entire painting as I described above. The varnish will keep the leaf from tarnishing.
      Nancy

  5. Vina Rathakoune

    Hi Nancy,
    Thank you for sharing your knowledge on gilding. I am so grateful I found you and I adore your work on gold leaf. I especially love the one on your site of Mt. Fuji.

    I am very new to gilding but I love the reflective quality of metal and I want to incorporate it into my work/ experiments. Recently I’ve painted an abstract oil painting on wood panel and I wanted to add gold leaf to the edges (on the raw wood, not the oil painting portion). I want to seal the painting but I’m not sure if I need to use different sealers since it’s imitation gold leaf adhered with a water-based adhesive and an oil painting. After reading your article, it seems like I can just use one sealer like the Golden Archival Varnish Spray or MSA Varnish. Is that correct or is there anything special I need to do?

    Also, in the future if I ever want to add gold leaf to other types of paintings, should I always match the adhesive type to the medium type? For example if I wanted to add some to a watercolor painting –> Use water-based adhesive. Oil painting, use oil-based adhesive.

    Reply
    • Nancy Reyner

      Hi Vina,

      You are correct that any varnish or sealer you use over oil paint, will work very well over real or imitation gold leaf. You are also correct in that you want to use a water-based adhesive over any water mediums. If you are using watercolor, though, you will need to seal the watercolor first before applying the water-based adhesive, because watercolor will lift when any water-based product is applied over it. Instead of sealing the watercolor painting, you can just use the oil-based adhesive directly over the watercolor and this won’t disturb the watercolor painting. Just remember the rule that oil and/or solvents can go OVER oil or acrylic. BUT water-based paints and products can NOT go over oil. So if you are adding adhesive over oil paint you can use the oil-based adhesive but NOT the water-based one.

      Good thinking on your part! I think you’ve got the right idea.

      Nancy

  6. Sasha Seyb

    Thanks for the video!!! I’m a decorative artist in San Diego, though I’m from Durango and I went to St John’s in the Fe. Like you, I love to mix media. I’m mostly a plaster artist but I love to add leaf and foil to my artwork. Currently I’m doing an exterior leaf project in a very windy area. I never knew about using wax paper to do transfer work, so this was a huge technical pro tip. Thank you!!! I love your work. It’s beautiful.
    We all must support each other!

    Reply
  7. Catherine

    Hi Nancy
    I wonder if you can help me please. I am an amateur oil painter and want to add some gold leaf to the background of a finished portrait for the first time . Finding it all a bit overwhelming there’s so much info out there…I’d just like a few touches of gold leaf here and there to add some colour / sparkle to the green background – please can you advise? What should I use? Also the link to the oil-based adhesive is broken and can’t seem to find another product which is oil based. Thank you for your help!! X

    Reply
    • Nancy Reyner

      Hi Catherine,
      Adding some bits of gold to the green background sound like a great idea! It is not difficult. Just make sure you use a solvent-based or oil-based adhesive made especially for adhering leaf. There are tons of brands and I’m sure they will all work well. Here is one I just found online from a good company: https://www.gildedplanet.com/oilsize.html
      Thanks for letting me know about the broken link. I’ll fix it now.
      Best,
      Nancy

  8. Martha Henry

    Hi Nancy, I have been sealing my gold FOIL with 2-3 coats of Golden’s gloss medium, glazing colors on the foil, then sealing with MSA gloss spray varnish. I may have to start painting the varnish to small areas.

    When the landscape painting is finished, I find the Polymer gloss varnish is to glossy, and the satin to matte, and kills the gold foil. Can I blend the two
    varnishes together to find something more natural? So far, I just leave the acrylic portion unvarnished, so there is no protection.

    Reply
    • Nancy Reyner

      Hi Martha,
      You are lucky that you are not tarnishing the leaf by applying gloss medium on it. Or else you are using real gold leaf. Be very careful as gloss medium, if applied thickly, or if water is added, will dry slow enough that the ammonia in the product (only while wet) can tarnish the leaf. If you are getting good results with your process, then great! I’m glad you have no tarnishing issues.

      Regarding your question, I agree that sometimes we want a sheen that’s in between. Yes you can definitely create your own mixture of the two sheens to get the results you want. If you use any varnish that is not gloss, such as matte or satin, it contains a white powder. It is important that you apply these varnishes over an isolation coat, or as long as your surface is shiny. If you apply a matte or satin varnish over any absorbent (seen as matte) areas you could risk ruining your painting. The varnish will sink into the absorbent surface, and the white powder stays on top. This is not fixable.

      I recommend applying a mixture of 1:1 Soft Gel Gloss with water (this is the recommended isolation coat Golden recommends, over the entire painting – leaf and paint. Once that is dry, apply the gloss varnish over the entire painting. Then create your mixture of gloss and satin and apply it over the surface as your second varnish layer.

      Hope this helps!

      Nancy

    • Bonita

      Hi Nancy,
      Your video was great… I was wondering why when I applied the gold leaf in some areas in my landscape (acrylic painting on canvas) that one minute it looked brilliant and then whilst I was mixing another colour of acrylic, I looked up and it turned green… I wasn’t happy about that. I’m trying to understand… does this mean if I use water based adhesive and use real gold, it will not turn green? Do I still need to seal the real gold on top? With GAC 200? And also, after if I wanted to paint on top of some areas of the real gold with acrylic paint will it be safe and not tarnish?
      As I’m new to painting, can I ask you do acrylic paintings need to be varnished? And if so, can you suggest a non toxic one so won’t smell out my house? And sorry
      one more question, if I finally add a varnish when painting is finished will it effect the real gold finish as don’t want to have to find out later all the hard work turns green… awaiting your response, appreciate it, thanks Bonita

    • Nancy Reyner

      Hi Bonita,

      The green you are getting sounds like it your leaf is tarnishing. If you are using imitation gold leaf, it is made mostly of copper. Copper will tarnish when exposed to air (but this takes many months to tarnish) or when exposed to ammonia. Ammonia is in ALL water-based acrylic products (including adhesives, paints and mediums) BUT the ammonia dissipates as soon as the product is dry to the touch. This means two things. It means (1) you need to seal the imitation leaf with enough sealer to protect it before you paint over it using water based acrylics. and (2) you must use the correct product for adhering the leaf.

      The leaf adhesive comes as water-based and also as solvent or oil-based. The water-based adhesive, even though it has ammonia in it while wet, gets to a tacky feel very very fast. This means if you follow directions carefully on the container label (usually saying you need to wait 20 minutes or more once the adhesive is applied, BEFORE applying the leaf). If you are applying the leaf on a water-based acrylic that is not meant specifically to adhere leaf, then it will turn brown or green right away. If you apply the correct product but don’t wait until the correct tact time, you will also get tarnishing. It sounds like this may be your issue?

      You are correct that if you use water-based OR oil-based leaf adhesive with real gold it will not tarnish. But you can also use either with imitation leaf and will not get the tarnish if you apply it correctly. Sometimes it takes some experimenting to get the right timing.

      Real gold doesn’t need to be sealed to avoid tarnishing BUT it is still very delicate, so I recommend sealing it too so that when you overpaint it won’t get scratched up or marred in any way. In answer to your other question, real gold does not tarnish with exposure to air or ammonia, so sealing is only needed to keep it looking good instead of getting scratched up by handling.

      Varnishing is always an option. I usually varnish all my paintings. Archival varnish meant for fine art paintings does two important things to your painting. It provides UV protection, and is removable for cleaning purposes. If you leaf is sealed properly (one coat of a sealer is not enough to keep it from tarnishing) then you can use a non-toxic varnish once your painting is all finished, as a top coat. For this I like to use Golden’s Polymer Varnish Gloss. It is non-toxic. This product will tarnish unsealed leaf, though, so you cannot use this as a seal over leaf, but once the leaf is sealed this product will be great over the sealed leaf and any acrylic paint you applied over the leaf. Again, no turning green if your leaf is properly sealed. This means at least 4 spray coats of a solvent-based sealer, at least one coat of a brush applied solvent-based sealer, and at least 4 coats of a water-based sealer (the only one you can use is GAC200 as this one dries so fast the ammonia won’t tarnish it). If you do use the GAC200 please please practice first on a surface you don’t care about. It is very tricky to use. You must use it thinly so it dries fast, and that means not adding any water, and also not overbrushing. More details about this are in the article in this post. I highly recommend watching the video I included in this post too.

      Hope all this helps you get the results you want.

      Best,
      Nancy

  9. Iona Moran

    Hi Nancy,
    I have been commissioned to do an oil painting with weeping cherry blossom and the client wants the flowers to look glittery.
    I was thinking of using silver leaf/flakes – is this the correct material to use?
    I work quite thickly with my oils and I basically just wanted to sprinkle on a product that will give a glittery effect and also use the correct adhesive so the oil paint won’t react.
    Any advise would be greatly appreciated .

    Reply
    • Nancy Reyner

      Hi Iona,
      Congratulations on your commission! It sounds like a wonderful painting to create. I have worked on many commissions, and want to share with you something I learned that may be helpful. Clients offer words like “glittery” and may visualize something that we don’t. Here’s what I would do. I’d take a few small pieces of cardboard, and paint them with a neutral color – or whatever general color you plan for the flowers. Then I’d try a different technique on each so that your client can pick which effect is meant my using the word glittery. Your client may just want it glossy! Here are some ideas: 1. try applying Iridescent Pearl over the painted cardboard, 2. Sprinkle the silver leaf flakes over a neutral color (or your flower color), 3. Try just using a gloss varnish or medium, 4. Try actual glitter and glaze over some of the glitter so it doesn’t stand out from the painting 5. silver leaf the flowers, then apply glazes over the leaf to shade and highlight the flowers where you want it to, 6. Apply Golden’s Glass Bead Gel on parts of the flower, let it dry, then apply a small amount of color with lots of turps so it’s washy over the bead gel. Bead Gel tends to give a wonderful glittery look as long as you don’t cover it with any opaque paint colors. Hope this helps give you some idea. As for any adhesive you want to use, it should be something compatible with the oil. Use an oil-based leaf adhesive. Hope this helps! Let me know how it goes!

  10. Andrea

    Can I mix glazing medium and pearling medium to cover my gold leaf before it is sealed? I am not interested in adding color to the leaf I am interest in adding depth. Or would a glazing medium with transparent white work best? I am so thankful you are here to answer questions about gold leafing because this seems to be a rare topic. Thank you!!

    Reply
    • Nancy Reyner

      Hi Andrea,
      Any water-based acrylic paint or medium contain ammonia. The ammonia will dissipate once the acrylic is dry to the touch. Ammonia will cause the copper in imitation gold leaf to tarnish within seconds upon contact. This means if you apply glazing medium or pearling medium (not familiar with this) on unsealed imitation leaf, you will risk tarnishing the leaf. You can apply these mediums over real gold leaf with no risk of tarnishing, as real gold leaf does not contain copper so it doesn’t tarnish. Applying a white glaze over the leaf will “veil” or mute it, so I’m not sure if this is the quality of depth you are seeking. Hope this helps answer your question.
      Nancy

  11. colette begg

    Hi Nancy, thank you so much for all this valuable information and your clear way of communicating it. The question I have is related to applying imitation gold leaf to an oil and coldwax painting. The coldwax medium is a Gamblin product and mixed with oil paint at an approx ratio of 50:50. I don’t believe it has ammonia in it. I like to seal my paintings with a final thin clear coat of the coldwax med and buff once dry. Would this be enough to seal the goldleaf? thanks

    Reply
    • Nancy Reyner

      Hi Colette, I do believe you can apply the coldwax medium OVER imitation gold leaf without any risk of tarnishing or other issues. However, I would not recommend applying the leaf OVER a surface that is coated with coldwax. I think the leaf adhesive (oil based or waterbased) might now adhere to the wax. You can experiment to see if it adheres. The oil-based adhesive may work, but definitely not the water-based adhesive.

      Nancy

  12. Maria

    What would be best brand name of adhesive to apply gold leaf to an oil painted canvas?

    Reply
    • Nancy Reyner

      Hi Maria,
      To apply leaf OVER oil painted canvas you must use an oil-based adhesive. As long as it is oil-based any brand will do. I’ve tried all the brands of both oil-based and water-based and as long as they are specifically for gilding (aka leaf adhesive or leaf sizing) they will all work very well. I don’t have any that I feel are better than another so do some price comparisons online to find which one is less expensive.
      Nancy

  13. Karen

    Hi Nancy, I want use oil paints over copper leaf. Am I reading correctly above that I could apply the leaf, apply 2 coats of a permanent sealer, and then paint over that? What permanent sealer would you recommend?

    Reply
    • Nancy Reyner

      Hi Karen,
      You can use any clear glossy spray sealer. There are inexpensive ones that work just fine at Home Depot and Walmart. Any clear spray should be fine. Only the expensive fine art varnishes are removable. Just check the can’s instructions to make sure it is not removable. If it is it will say how to remove it on the can.
      Nancy

    • Nancy Reyner

      Hi Karen,

      Yes you can apply oil paints over any metal leaf, including as you asked, copper. Oil paint will not harm metal leaf and adheres very well, so you can paint directly on unsealed leaf if you are careful with your brushwork. If you don’t want to risk scratching the leaf with your brushwork, then you can seal the leaf prior to painting over it. You can use two coats of a permanent sealer. Just about any permanent gloss sealer will work. Even glossy clear sprays found in Home Depot or Walmart will work fine, and these are very inexpensive. Once dry you can paint over that with oil paint.
      Nancy

  14. Karen

    This was so helpful, thank you!

    Reply
    • Nancy Reyner

      Thanks Karen! Glad you liked it.

  15. dawn gerety

    WOW this video was great! thank you so much for putting all this info together. I’m really excited to start my first gold leaf project!

    Reply

Leave a Reply to Vina Rathakoune Cancel reply

Your email address will not be published. Required fields are marked *

The maximum upload file size: 5 MB. You can upload: image. Drop file here

About Nancy

Professional fine artist Nancy Reyner created this blog about art, painting and creativity from her career of over 30 years. She lives in Santa Fe, New Mexico. Subscribe below for free tips on art and painting.

Join Mailing List

 

Nancy’s #1 TIP FOR PAINTERS

Free pdf

 

 

MORE PAINTING VIDEOS

Nancy’s Youtube